Fordson N 1933:
|
25.04.2007
|
|
|
This is some pictures of a 1933 Fordson N that my father got in the late seventies. It was stored until 2004 when I took it out and started to look at it. The tractor looked in pretty good shape for it's age.
|
|
Fordson N 1933:
|
25.04.2007
|
|
|
There was bad compression on it, so I pulled the head off, and found stuck valves. The walves was freed up, and reground, and the head put back.
|
|
Fordson N 1933:
|
25.04.2007
|
|
|
The left side of the block suffers from an old freese damage, and most of the wall is off, and blanked with a plate bolted to the block.
|
|
Fordson N 1933:
|
25.04.2007
|
|
|
The blanking plate was fitted with new bolts, and sealed with silicone gasket.
The rear wheels are some kind of truck wheels modified to fit at som stage.
|
|
Fordson N 1933:
|
25.04.2007
|
|
|
Bougth a pair of rear steel wheels, and was ready for a test drive.
The tractor runs good, and all I have done is a valve job.
|
|
Fordson N 1933:
|
25.04.2007
|
|
|
Pulling a disc harrow
|
|
Fordson N 1933:
|
25.04.2007
|
|
|
Disc harrow
|
|
Fordson N 1933:
|
25.04.2007
|
|
|
The 33 with an oliver plow
|
|
Fordson N 1933:
|
25.04.2007
|
|
|
Oliver plow
|
|
Fordson N 1933:
|
18.05.2011
|
|
|
The 33 gets an light overhaul in the winter 2010, with new piston rings and shimed big ends
|
|
Fordson N 1933:
|
18.05.2011
|
|
|
"new" used rods from a E27N have good small ends, and big ends that got tight with all shims removed. The original rods was worn out, and knocked.
|
|
Fordson N 1933:
|
18.05.2011
|
|
|
New old stock piston rings with + 0.037, to fith the 0.037 over pistons.
|
|
Fordson N 1933:
|
18.05.2011
|
|
|
The block ready to put back. The clutch was also dismanteled, and inspected during the split.
|
|
|